QUICK CHECKS

General fixing & care

Set out: Use the approved installation schedule and fixing detail for identification and roof-access signs. Mark and level each position.
Prepare: Use a clean, dry, suitable surface. Check compatibility between the substrate, panel, tape, adhesive and environment; bare concrete or timber may need sealing.
Fix: Standard panels have double-sided tape and need additional suitable adhesive. Tape is not a universal structural fixing. Follow the manufacturer’s pressure, temperature, curing and load instructions; overhead, exposed or structural mounting needs the project fixing detail.
Care: Remove guide marks and protective film. Use a soft cloth and a cleaner approved for the panel/finish; avoid abrasion and unapproved solvents. Check healthcare, chemical, pool and outdoor cleaning conditions.

Film and lettering

Privacy film: measure coverage, clean each pane with a compatible cleaner, follow the supplier’s wet/dry method, squeegee from the centre and trim neatly. Allow the specified cure before cleaning. Required vision-strip placement is in Access Braille.
Cut vinyl: check the receiving surface and use the supplied application instructions. Remove transfer film carefully without lifting the lettering.

Sources & project checks

NCC notes retain the existing NCC 2022 references. Use the code edition, jurisdiction and approved sign schedule for your project.

Quick checks support your approved project specification; they do not certify a sign or installation.